void HX8347_Init_CMO32(void) 
{  
     RESET(); 
    DelayX1ms(150);    // After Inter-MicroP Program (load OTP) 
 
// Gamma for CMO 3.2Ħħ 
 
  Set_LCD_8B_REG(0x0046,0x00A4);    
   Set_LCD_8B_REG(0x0047,0x0053);    
  Set_LCD_8B_REG(0x0048,0x0000);    
  Set_LCD_8B_REG(0x0049,0x0044);    
  Set_LCD_8B_REG(0x004A,0x0004);    
  Set_LCD_8B_REG(0x004B,0x0067);    
  Set_LCD_8B_REG(0x004C,0x0033);    
  Set_LCD_8B_REG(0x004D,0x0077);    
  Set_LCD_8B_REG(0x004E,0x0012);    
  Set_LCD_8B_REG(0x004F,0x004C);    
  Set_LCD_8B_REG(0x0050,0x0046);    
  Set_LCD_8B_REG(0x0051,0x0044);    
  
//240x320 window setting 
  
  Set_LCD_8B_REG(0x0002,0x0000);    // Column address start2 
  Set_LCD_8B_REG(0x0003,0x0000);    // Column address start1 
  Set_LCD_8B_REG(0x0004,0x0000);    // Column address end2 
  Set_LCD_8B_REG(0x0005,0x00EF);    // Column address end1 
  Set_LCD_8B_REG(0x0006,0x0000);    // Row address start2 
  Set_LCD_8B_REG(0x0007,0x0000);    // Row address start1  
  Set_LCD_8B_REG(0x0008,0x0001);    // Row address end2 
 Set_LCD_8B_REG(0x0009,0x003F);     // Row address end1 
  
// Display Setting   
 
 Set_LCD_8B_REG(0x0001,0x0006);  // IDMON=0, INVON=1, NORON=
 
 Set_LCD_8B_REG(0x0016,0x0048);   // MY=0, MX=0, MV=0, ML=1, BG
  
 Set_LCD_8B_REG(0x0023,0x0095);     // N_DC=1001 0101 
  Set_LCD_8B_REG(0x0024,0x0095);    // PI_DC=1001 0101 
  Set_LCD_8B_REG(0x0025,0x00FF);    // I_DC=1111 1111  
  
  Set_LCD_8B_REG(0x0027,0x0002);    // N_BP=0000 0010 
  Set_LCD_8B_REG(0x0028,0x0002);    // N_FP=0000 0010 
  Set_LCD_8B_REG(0x0029,0x0002);    // PI_BP=0000 0010 
  Set_LCD_8B_REG(0x002A,0x0002);    // PI_FP=0000 0010 
  Set_LCD_8B_REG(0x002C,0x0002);    // I_BP=0000 0010   
  Set_LCD_8B_REG(0x002D,0x0002);    // I_FP=0000 0010   
  
  Set_LCD_8B_REG(0x003A,0x0001);    // N_RTN=0000, N_NW=001  
  Set_LCD_8B_REG(0x003B,0x0001);    // PI_RTN=0000, PI_NW=001 
  Set_LCD_8B_REG(0x003C,0x00F0);    // I_RTN=1111, I_NW=000 
  Set_LCD_8B_REG(0x003D,0x0000);    // DIV=00 

DelayX1ms(20); 
 
    Set_LCD_8B_REG(0x0035,0x0038);    // EQS=38h  
  Set_LCD_8B_REG(0x0036,0x0078);    // EQP=78h 
  
  Set_LCD_8B_REG(0x003E,0x0038);    // SON=38h 
  
  Set_LCD_8B_REG(0x0040,0x000F);    // GDON=0Fh 
  Set_LCD_8B_REG(0x0041,0x00F0);    // GDOFF 
 
// Power Supply Setting 
 
 Set_LCD_8B_REG(0x0019,0x0049);     // CADJ=0100, CUADJ=100(FR:60Hz),, OSD_EN=1 
  Set_LCD_8B_REG(0x0093,0x000F);    // RADJ=1111, 100% 
 DelayX1ms(10); 
 
  Set_LCD_8B_REG(0x0020,0x0040);      // BT=0100 
   
 Set_LCD_8B_REG(0x001D,0x0007);  // VC1=111 
 Set_LCD_8B_REG(0x001E,0x0000);  // VC3=000 
 Set_LCD_8B_REG(0x001F,0x0004);  // VRH=0100 
  
// VCOM Setting for CMO 3.2Ħħ Panel 
 
  Set_LCD_8B_REG(0x0044,0x004D);     // VCM=100 1101   
  Set_LCD_8B_REG(0x0045,0x0011);     // VDV=1 0001 
 DelayX1ms(10); 
  
  Set_LCD_8B_REG(0x001C,0x0004);    // AP=100 
 DelayX1ms(20); 
  Set_LCD_8B_REG(0x0043,0x0080);    //set VCOMG=1 
 DelayX1ms(5); 
  Set_LCD_8B_REG(0x001B,0x0008);    // GASENB=0, PON=0, DK=1, XDK=0, VLCD_TRI=0, STB=0 
 DelayX1ms(40); 
     
  Set_LCD_8B_REG(0x001B,0x0010);    // GASENB=0, PON=1, DK=0, XDK=0, VLCD_TRI=0, STB=0 
 DelayX1ms(40);     
   
// Display ON Setting 
 
  Set_LCD_8B_REG(0x0090,0x007F);     // SAP=0111 1111  
 
 Set_LCD_8B_REG(0x0026,0x0004);    //GON=0, DTE=0, D=01 
 DelayX1ms(40); 
  Set_LCD_8B_REG(0x0026,0x0024);    //GON=1, DTE=0, D=01 
  Set_LCD_8B_REG(0x0026,0x002C);    //GON=1, DTE=0, D=11 
 DelayX1ms(40); 
   
  Set_LCD_8B_REG(0x0026,0x003C);    //GON=1, DTE=1, D=11  
 
// Set internal VDDD voltage 
 
  Set_LCD_8B_REG(0x0057,0x0002);    //Test_Mode Enable 
  Set_LCD_8B_REG(0x0055,0x0000);    //VDC_SEL=000, VDDD=1.95V 
  Set_LCD_8B_REG(0x0057,0x0000);    // Test_Mode Disable 
}




void HX8347A_STB_INTO (void) 
{ 
 
// Display Off   
 
 Set_LCD_8B_REG(0x0026,0x0038);  //GON=1, DTE=1, D=10                                      
    DelayX1ms (40); 
 Set_LCD_8B_REG(0x0026,0x0028);  //GON=1, DTE=0, D=10 
    DelayX1ms (40); 
 Set_LCD_8B_REG(0x0026,0x0000);  //GON=0, DTE=0, D=00 
 
// Power Off   
 
 Set_LCD_8B_REG(0x0043,0x0000);  // VCOMG=0 
 DelayX1ms(10);     
 Set_LCD_8B_REG(0x001B,0x0000);  // GASENB=0, PON=0, DK=0, XDK=0,   
      // VLCD_TRI=0, STB=0 
 DelayX1ms(10);     
 Set_LCD_8B_REG(0x001B,0x0008);  // GASENB=0, PON=0, DK=1, XDK=0,   
      // VLCD_TRI=0, STB=0 
 DelayX1ms(10); 
 Set_LCD_8B_REG(0x001C,0x0000); // AP=000 
 DelayX1ms(10); 
 Set_LCD_8B_REG(0x0090,0x0000); // SAP=00000000 
 DelayX1ms(10); 
 
// Into STB mode   
 
 Set_LCD_8B_REG(0x001B,00009);  // GASSENB=0, PON=0, DK=1, XDK=0,   
       // VLCD_TRI=0, STB=1 
 DelayX1ms(10); 
 
// Stop Oscillation 
 
 Set_LCD_8B_REG(0x0019,0x0048);  // CADJ=0100, CUADJ=100, OSD_EN=0 
}
void HX8347A_STB_EXIT (void) 
{ 
 
// Start Oscillation 
 
 Set_LCD_8B_REG(0x0019,0x0049);  // OSCADJ=100 010(FR:60Hz), OSD_E
 DelayX1ms(10); 
  
// Exit STB mode   
 
 Set_LCD_8B_REG(0x001B,0x0008);  // NIDSENB=0, PON=0, DK=1, XDK=0, 
       // VLCD_TRI=0, STB=0 
  
// Power Supply Setting 
 
 Set_LCD_8B_REG(0x0020,0x0040);  // BT=0100 
 Set_LCD_8B_REG(0x001D,0x0007);  // VC1=111 
 Set_LCD_8B_REG(0x001E,0x0000);  // VC3=000 
 Set_LCD_8B_REG(0x001F,0x0003);  // VRH=0011 
 Set_LCD_8B_REG(0x0044,0x0020);  // VCM=010 0000 
 Set_LCD_8B_REG(0x0045,0x000E);  // VDV=0 1110 
 DelayX1ms(10); 
 Set_LCD_8B_REG(0x001C,0x0004);  // AP=100 
 DelayX1ms(20); 
 Set_LCD_8B_REG(0x001B,0x0000);  // NIDSENB=0, PON=0, DK=0, XDK=0, 
      // VLCD_TRI=0, STB=0 
 DelayX1ms(40); 
 Set_LCD_8B_REG(0x001B,0x0010);  // NIDSENB=0, PON=1, DK=0, XDK=0, 
      // VLCD_TRI=1, STB=0 
 DelayX1ms(40);     
 Set_LCD_8B_REG(0x0043,0x0080);    // VCOMG=1 
 DelayX1ms(100); 
  
// Display ON Setting 
 
 Set_LCD_8B_REG(0x0090,0x007F);    // SAP=01111111 
 DelayX1ms(40); 
 
 Set_LCD_8B_REG(0x0026,0x0004);    //GON=0, DTE=0, D=01 
 DelayX1ms(40); 
 Set_LCD_8B_REG(0x0026,0x0024);    //GON=1, DTE=0, D=01 
 Set_LCD_8B_REG(0x0026,0x002C);     //GON=1, DTE=0, D=11 
 DelayX1ms(40); 
   
  Set_LCD_8B_REG(0x0026,0x003C);    //GON=1, DTE=1, D=11  
 
}